BODY ARMOR SIZE CHART
Choosing an ill-fitting vest will not only make it awkward to wear but will severely reduce its efficacy. A vest that fits properly will not hinder movement in any way and will allow a full range of movement without sacrificing protection. It is important to make sure when trying on body armor that you can perform a full range of movement, and that you are confident when wearing body armor. A bullet or stab-proof vest should sit just above the belly button and extend no lower than the naval, as it is designed to protect the vital organs; any higher will not properly do this and any lower will hinder movement. Protecting the vital organs is of the utmost importance, as an injury to the lower naval will be serious, but not life-threatening.
Choosing a bullet or stabproof vest should be similar to choosing clothes, and they are sized in similar ways. If you are unsure as to what size would be best for you, a larger size is recommended. This is because body armor is very adjustable thanks to its Velcro straps, and it will be far easier to make a vest fit if it is too big than if it is too small. A vest that is too small will be far less likely to protect properly. Below are the sizes and measurements available:
MALE BODY ARMOR
Before you purchase your vest, we recommend checking your measurements to ensure your vest is the perfect fit for you. You should measure your chest, your waist, and the length from just below your sternum to your navel.SIZE | S | M | L | XL | XXL | 3XL | 4XL |
CHEST (IN) |
34 - 36 | 38 - 40 | 42 - 44 | 46 - 48 | 50 - 52 | 54 - 56 | 58 - 60 |
WAIST (IN) |
28 - 30 | 32 - 34 | 36 - 38 | 40 - 42 | 44 - 46 | 48 - 50 | 52 - 54 |
SIZE | SHORT | NORMAL | LONG |
LENGTH (IN)* |
12 - 13" | 13.5 - 14" | 14.5 - 17" |
*Approx length in inches but may vary based on each individual body type and measurements.
FEMALE BODY ARMOR
Before you purchase your vest, we recommend checking your measurements to ensure your vest is the perfect fit for you. You should measure your chest, your waist, and the length from just below your sternum to your navel.SIZE | S | M | L | XL | XXL | 3XL | 4XL |
CHEST (IN) |
34 - 36 | 38 - 40 | 42 - 44 | 46 - 48 | 50 - 52 | 54 - 56 | 58 - 60 |
WAIST (IN) |
28 - 30 | 32 - 34 | 36 - 38 | 40 - 42 | 44 - 46 | 48 - 50 | 52 - 54 |
BUST (IN) |
32 - 34 | 34 - 38 | 38 - 42 | 42 - 46 | 47 - 51 | 52 - 56 | 57 - 61 |
SIZE | SHORT | NORMAL | LONG |
LENGTH (FT) | 5’9” AND BELOW | 5’10” - 6’0” | 6’1” AND ABOVE |
LENGTH (IN)* |
12 - 13" | 13.5 - 14" | 14.5 - 17" |
*Approx length in inches but may vary based on each individual body type and measurements.
HELMETS
Before you purchase your helmet, we recommend checking your measurements to ensure your helmet is the perfect fit for you. You should measure your head with a cloth tape measure above your eyebrows and above your ears.MEASUREMENT | M | L |
CIRCUMFERENCE (INCHES) | 21.2 - 23.3" | 22.5 - 25.2" |
Remember, helmets should fit closely to the head with no movement.
This armor is perfectly suited to door supervisors, close protection officers and many others.
- Lightweight
- Waist adjustment
- Breathable CoolMAX lining
- Sizing from small to 4XL
ADDITIONAL INFORMATION
FREQUENTLY ASKED QUESTIONS
Measurement | S | M | L | XL | XXL | 3XL | 4XL |
Chest (inches) | 34 - 36" | 38 - 40" | 42 - 44" | 46 - 48" | 50 - 52" | 54 - 56" | 58 - 60" |
Waist (inches) | 28 - 30" | 32 - 34" | 36 - 38" | 40 - 42" | 44 - 46" | 48 - 50" | 52 - 54" |
Measurement | Short | Regular | Long |
Length (inches)* | 12 - 13" | 13.5 - 14" | 14.5 - 17" |
Dimensions are approximations, but may vary due to individual measurements and body types
How to clean the outer carrier
- Remove all protective inserts and any accessories attached to the outer carrier.
- Close any zips or Velcro adjustments.
- In the wash instructions on the carrier care label, you will see the following icons. It is recommended that you hand wash the carrier with a soft cloth or brush.
- To dry, hang or tumble dry on low heat (do not tumble dry the protective inserts).
How to wash soft protective panels or hard ballistic plates
- Remove the panels or plates. from the carrier.
- Use a mixture of cool water and mild detergent. Use a mixture of cool water and mild detergent and gently wash the panels or plates with a damp sponge.
- With a damp sponge, remove any excess soap.
- Dry the panels or plates with a cloth.
- DO NOT reinsert the panels or plates into the carrier until they are FULLY dry.